FicWad

The clay bar was invented in Japan back again in the late 1980s as a paint cleansing program made to safely and securely and properly get rid of embedded floor contamination not removed with a normal vehicle clean. At Max Polish, we use Meguiar’s C-2000 Expert Detailing Clay which arrives in Mild or Aggressive variations.



How to inform if your vehicle demands claying?

Following time you are accomplished washing and drying your auto, run http://www.eliteid.com.sg/#!maintenance/c66t down above the bonnet of your auto. If the surface area feels gritty or spotty even right after the wash, then you want to clay the car.

We recommend making use of a clay bar roughly once each three months, or before where you prepare on sprucing or waxing the paint.

If your auto is usually in areas with industrial fallout or contamination like Jurong Island, utilizing a clay bar a lot more often may be essential.

Step by step instructions for claying your automobile

*Wash and dry your automobile

*Break off a small piece of clay that you will be doing work with and form it into a flat floor

Operating on one modest segment of the automobile at the time (for example the entrance remaining fender, adopted by front still left door and so on), mist the clay bar lubricant above your operating location, so that the whole location is coated in clay lubrication

*Gently glide the clay bar above the selected spot employing overlapping passes heading still left to proper or up and down, enable the claying to take in the contamination. Stubborn contamination can call for a excellent amount of time, clay lubrication and passes to eliminate.

*Continue operating on an region right up until all contamination is eliminated. You can notify this has transpired because http://www.eliteid.com.sg will slide very easily across the paint. When you run your palm confront-down throughout the paint, it must truly feel sleek like glass!

*Wipe off the excess clay lube with a microfiber towel

*Proceed measures 3 – six right up until the entire vehicle has been appropriately clayed

*A clay bar demands correct lubrication to stop it from damaging your paint. This can be attained by possibly employing the automobile washing cleaning soap and h2o resolution or a detailing spray.

Important factors to notice

Reshape your piece of clay soon after every section so that there is a clean refreshing area uncovered. If you can not expose a fresh surface, crack off a new piece of clay.

If you drop your clay bar on the floor, it is strongly suggested that you DISCARD the total clay bar as it could have picked up floor contaminants. Employing the impacted clay bar on your automobile could result in scratches and swirl marks. Do not say we didn’t alert you!

To enhance the life of your clay bar, spray the bar with a clay lube and keep it in a clay bar storage container.



What is up coming right after claying?

Claying your vehicle with a clay bar is not a substitute for sharpening your paint but relatively a process to be applied prior to sprucing that will help eliminate stubborn contaminants bonded to your paint. Then, the sprucing procedure gets rid of paint problems such as: scratches, swirls, oxidation and staining although bettering all round paint clarity.